This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
This cable is 2 meters long. We have cables in a ton of sizes so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well)
Please note, we did test this length cable with our Pi Model B/B+ and a Pi Camera and it worked great but 2 meters is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images.
El Makey Makey es un kit de creación interactiva que convierte prácticamente cualquier objeto común en diferentes teclas táctiles con lo que se puede ...
Description: This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles. The eye ...
Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...
Funda de Protección Traslúcida de Tacto Suave para Micro:bit V2 ...
Incluye La placa Micro:bit V2 y el robot Maqueen El Maqueen es un robot de programación ...
Cable USB estándar de 15 cm. de largo. ideal para la placa ...
El robot Smart Cutebot es un coche inteligente de tracción trasera impulsado por dos motores de alta velocidad. El Cutebot tiene muchos extras incorporados, como un sensor ultrasónico y un sensor de distancia, dos LED RGB y luces de ...