JustBoom Digi HAT

52.55
63.59€ con IVA
Referencia: SPRKC-DEV-14317
Fabricante: Sparkfun

The JustBoom Digi HAT is a high-resolution digital audio output add-on board for the Raspberry Pi. Simply stack the plug-and-play add-on board (HAT) onto your Raspberry Pi A+, B+, 2B or the new 3B, and it will be ready to use immediately. The JustBoom Digi HAT produces an unmodified, high-quality digital audio data stream for bit-perfect transmission to your hi-fi system.

JustBoom designed the Digi HAT to be simple to install and use. With no soldering required and all the mounting hardware already provided, this product is suitable for beginners and seasoned professionals alike. Just connect your Digi HAT to external DAC or amplifier/amplified speakers and you can be up and running quickly, enjoying flawless high-quality audio playback within minutes.

The Raspberry Pi Digi HAT uses the I2S interface for its audio input, which reduces CPU load on the Raspberry Pi compared with USB solutions. It is also powered directly from the GPIO header, so no extra cables or power supplies are required to connect to the Raspberry Pi. All of the Raspberry Pi GPIO pins are still accessible on the Digi HAT for easy customization of your project. Add additional sensors, buttons, LEDs, rotary encoders or anything your heart desires.

Features:

  • Dedicated S/PDIF output interface chip supports up to 192kHz / 24-bit resolution
  • Digital audio output over either optical (TOSLINK) or coaxial (RCA electrical) connectors
  • Low-jitter, bit-perfect digital output
  • Output transformer for galvanic isolation
  • Plug-and-play compatibility for ease of use
  • Software volume control from your Raspberry Pi
  • No soldering required
  • Powered by the Raspberry Pi GPIO header
  • Compatible with Raspberry Pi A+, B+, 2B and the new 3B
  • Mounting hardware included
  • Optional IR receiver included in package
  • All Raspberry Pi GPIO pins still accessible via 40-pin unpopulated extension header
  • Full driver support in Raspbian / NOOBS
  • Compatible with OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others

Documents:

Videos

Para obtener más información, visite la página del producto.
Otros productos que pueden ser de su interés

Makey Makey Original Classic

49.50€ 46.45€

El Makey Makey es un kit de creación interactiva que convierte prácticamente cualquier objeto común en diferentes teclas táctiles con lo que se puede ...

Needle Set

2.65€

Description: This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles. The eye ...

Cable Dupont Jumper 40 piezas 200mm Macho-Hembra

3.34€

Separación entre pines 2.54mm Se separa ...

Cable Dupont Jumper 40 piezas 200mm Macho-Macho

3.34€

Separación entre pines 2.54mm Se separa ...

Cable Dupont Jumper 40 piezas 200mm Hembra-Hembra

2.87€

Separación entre pines 2.54mm Se separa ...

Kit Micro:bit Go V2 con Portapilas, Pilas y Cable

19.80€

Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...

Funda Traslúcida para Micro:bit V2

3.95€

Funda de Protección Traslúcida de Tacto Suave para Micro:bit V2 ...

Copyright © 2006-2024 Electan Electrónica y Robótica
Electan
Tu Tienda Donde Comprar Micro:bit, Maqueen, Arduino y Robotica On Line. Todo lo que necesitas para tus proyectos a un click

Ubicacion: Elche, España

Teléfono: 966 410 250

E-Mail: info@electan.com