MicroPython pyboard v1.1

The pyboard is a compact and powerful electronics development board that runs MicroPython. It connects to your PC over USB, giving you a USB flash drive on which to save your Python scripts, and a serial Python prompt (a REPL) for instant programming. With the MicroPython pyboard you gain a low-level Python operating system that you are able to use to control plenty of different electronics projects.

At its heart, the MicroPython pyboard possesses a STM32F405RG microcontroller with a 168 MHz Cortex M4 CPU, 1024KiB flash ROM, and 192KiB of RAM. Each pyboard is also equipped with a microUSB connector for power and serial communications, a microSD card slot, an MMA7660 3-axis accelerometer, 31 GPIO, four LEDs, a reset switch and a user switch. We have two options for the pyboard available: one with headers and one without.

MicroPython is a complete rewrite of the Python (version 3.4) programming language so that it fits and runs on a microcontroller. It includes many optimizations so that it runs efficiently and uses very little RAM. Additionally, MicroPython runs bare-metal on the pyboard, and essentially gives you a Python operating system. The built-in pyboard module contains functions and classes to control the peripherals available on the board, such as UART, I²C, SPI, ADC and DAC.

Features:

• STM32F405RG microcontroller
• 168 MHz Cortex M4 CPU with hardware floating point
• 1024KiB flash ROM and 192KiB RAM
• MicroUSB connector for power and serial communication
• MicroSD card slot, supporting standard and high-capacity SD cards
• 3-axis accelerometer (MMA7660)
• Real-Time Clock (RTC) with optional battery backup
• 24 GPIO on left and right edges and 5 GPIO on bottom row, plus LED and switch GPIO available on bottom row
• 3x 12-bit analog to digital converters, available on 16 pins, 4 with analog ground shielding
• 2x 12-bit digital to analog (DAC) converters, available on pins X5 and X6
• 4 LEDs (red, green, yellow and blue)
• 1 reset and 1 user switch
• Onboard 3.3V LDO voltage regulator, capable of supplying up to 250mA, input voltage range 3.6V to 16V
• DFU bootloader in ROM for easy upgrading of firmware

Documents:

• Hookup Guide
• Quick Reference
• Tutorial Page

Videos