SparkFun Roshamglo Badge Kit

18.17
21.99€ con IVA
Referencia: SPRKC-KIT-14130
Fabricante: Sparkfun

The SparkFun Roshamglo is the new and fun way to play Rock-Paper-Scissors with your friends! The board uses the ATtiny84, and has an IR LED and receiver to communicate between badges. To play, simply point the USB connector at your opponents Roshamglo up to 5 feet away and press the 5-way switch to the left for rock, up for paper, and right for scissors. The red/green LED will display a solid red for lose, green for win, or alternate red and green for a tie. Your Roshamglo can also be worn with a lanyard clip to provide you easier access when a battle is about to ensue!

The Roshamglo Badge comes as an easy to assemble kit that only requires you to solder on six battery clips to the underside of the board and insert three AAA sized alkaline batteries. No other soldering or programming is required! Once you install the clips and batteries you can start playing Rock Paper Scissors with a friend or start hacking your Roshamglo.

The Roshamglo uses the Micronucleaus bootloader, which allows for programming from the Arduino IDE via the USB connector at the front of the board. We have included two tutorials below to help teach you how to hack your new Roshamglo as well as turn it into a remote to control to turn on and off most styles of televisions!

Note: If you don't have a scoreboard available to reset the play counter, you can download the firmware here. Commenting out gameResult = 3; on line 279 will remove the play count limitation written in the stock code.

Includes:

  • 1x Roshamglo Board
  • 3x AAA Alkaline Battery
  • 6x AAA Battery Holder

Features:

  • 8kB of flash memory for our program (~6kB after the bootloader is installed)
  • 512B of SRAM, which stores our variables used in our program
  • 512B of EEPROM
  • 12 IO pins MAX (the Roshamglo breaks out 9 of these pins)
  • 10-bit analog to digital converter which can be used on 8 pins
  • IR LED
  • IR receiver with built in 38kHz demodulator
  • USB programming
  • Programmable red and green LED
  • Power switch
  • 5-way switch for input
  • Reset switch

Documents:

Para obtener más información, visite la página del producto.
Otros productos que pueden ser de su interés

Makey Makey Original Classic

49.50€ 46.45€

El Makey Makey es un kit de creación interactiva que convierte prácticamente cualquier objeto común en diferentes teclas táctiles con lo que se puede ...

Needle Set

2.65€

Description: This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles. The eye ...

Cable Dupont Jumper 40 piezas 200mm Macho-Hembra

3.34€

Separación entre pines 2.54mm Se separa ...

Cable Dupont Jumper 40 piezas 200mm Hembra-Hembra

2.87€

Separación entre pines 2.54mm Se separa ...

Micro:bit V2.2 con BLE 5.0 Micrófono Altavoz y Acelerómetro

16.95€

La BBC micro:bit v2 es una computadora de bolsillo que te permite ser creativo con la tecnología digital. ¡Puedes codificar, personalizar y controlar la micro:bit desde cualquier lugar! Puedes usar tu micro:bit V2 para todo tipo de ...

Kit Micro:bit Go V2 con Portapilas, Pilas y Cable

19.80€

Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...

Funda Traslúcida para Micro:bit V2

3.95€

Funda de Protección Traslúcida de Tacto Suave para Micro:bit V2 ...

Cable USB 2.0 Terminales A y Micro B 20 cm Micro:bit

1.75€

Cable USB estándar de 15 cm. de largo. ideal para la placa ...

Copyright © 2006-2024 Electan Electrónica y Robótica
Electan
Tu Tienda Donde Comprar Micro:bit, Maqueen, Arduino y Robotica On Line. Todo lo que necesitas para tus proyectos a un click

Ubicacion: Elche, España

Teléfono: 966 410 250

E-Mail: info@electan.com