If you have yourself a TinyFPGA A-series board (including the AX2 found on our site) then you are definitely going to need this handy TinyFPGA Programmer. The TinyFPGA Programmer is a very simple USB-JTAG bridge designed to program bitstreams onto TinyFPGA A1 and A2 boards. Rather than an FTDI2232 USB interface chip the TinyFPGA Programmer uses a PIC16F1455 USB microcontroller and equipped with a micro USB connector. While not compatible with the FTDI2232 chip, the PIC micro has a much lower overall cost allowing your hardware to be cheaper overall!
The TinyFPGA Programmer slots onto the JTAG pins of the A-series FPGA boards. Using the TinyFPGA Programmer Application you can program .jed files generated by Lattice Diamond.
Note: Please keep in mind that you will only need the TinyFPGA Programmer for "A-series" Tiny FPGA boards and not the "B-Series" variety. This is due to the fact the that B-series TinyFPGAs are equipped with an on-board USB interface.
Documents:
Videos
El Makey Makey es un kit de creación interactiva que convierte prácticamente cualquier objeto común en diferentes teclas táctiles con lo que se puede ...
Description: This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles. The eye ...
La BBC micro:bit v2 es una computadora de bolsillo que te permite ser creativo con la tecnología digital. ¡Puedes codificar, personalizar y controlar la micro:bit desde cualquier lugar! Puedes usar tu micro:bit V2 para todo tipo de ...
Este kit incluye: Micro:bit V2 Cable USB corto Portapilas para 2 pilas AAA 2 pilas ...
Funda de Protección Traslúcida de Tacto Suave para Micro:bit V2 ...
Incluye La placa Micro:bit V2 y el robot Maqueen El Maqueen es un robot de programación ...
Cable USB estándar de 15 cm. de largo. ideal para la placa ...